Shenzhen Zenhon Technology CO.,LTD
Shenzhen Zenhon Technology CO.,LTD
Add to Cart
HDMI2.0 KVM ,Extender over Single CAT5e/6(120M),HDMI KVM Extender
1.0 INTRODUCTION
The HDMI KVM Extender use single cat-5e or cat-6(recommended) cables up to 120 meters instead of HDMI cable to transmit high definition signal, for cutting down cost.
2.0 SPECIFICATIONS
| HDMI Version | HDMI2.0 |
| Transmitter Input Ports | HDMIx1(AF),USB(BF)x1 |
| Transmitter Output Ports | HDMIx1(AF),CAT5e/6x1,IR TXx1 |
| Receiver Input Ports | CAT5e/6x1,IR RXx1 |
| Receiver Output Ports | HDMIx1(AF),USB(AF)x2 |
| Frequency Bandwidth | 18Gbps |
| Input/Output Resolutions | 480i/p,576p,720p,1080i/p,4Kx2K@60Hz |
| Audio | Sample rate:32kHz,44.1kHz,48kHz,96KHz |
| IR remote control | 20~60KHz;NEC |
| ESD Protection Human Body Model | ± 8kV (air-gap discharge)± 4kV (contact discharge) |
| Operating Temperature | 0˚C ~ 40˚C / 32˚F ~ 104˚F |
| Storage Temperature | 20˚C ~ 60˚C / -4˚F ~ 140˚F |
| Relative Humidity | 20~90% RH (non-condensing) |
| Dimensions (mm) | 170x81.5x22 |
3.0 FEATURES
1. Signal transmission :CAT5e/6(recommended) cables up to 120 meters
instead of HDMI cables are connected between TX and RX Extender.
2. Support HDMI2.0,HDCP2.2,HDR,18Gbps.
3. Support Input/Output resolution:
480i/p,576i/p,720p,1080i/p,4Kx2K@60Hz.
4. Support TX of Extender With HDMI Loopout.
5. Support video format up to 4Kx2K@60Hz with 24bit RGB/YcbCR
4:4:4/YCBCR4:4:4,and up to 4Kx2K@60Hz with 12bit YCBCR 4:4:4.
6. Audio format support:
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
7. Support Keyboard and Mouse extension.
8. Support 20-60KHz Dual IR Working.
9. Support RS232.
10. Extend the transmission distance and improve transmission signal.
4.0 PACKAGE CONTENTS
When first unpacking your extender please check to see if the following items are included:
1. HDMI Extender Transmitter ------------------------------------------------ 1PCS
2. HDMI Extender Receiver --------------------------------------------------- 1PCS
3. IR Transmitter ------------------------------------------------------------------ 2PCS
4. IR Receiver --------------------------------------------------------------------- 2PCS
5. 5V DC Power Supply adapter --------------------------------------------- 2PCS
6. USB Data Cable----------------------------------------------------------------1PCS
7. Operation Manual ------------------------------------------------------------- 1PCS
5.0 PANEL DESCRIPTIONS
HDMI KVM Extender Transmitter
1. Power ----------------------------------DC Power Input Status
2. Status ---------------------------------------------working status
3. USB Input ----------------------------------------USB Input port
4. DC/5V--------------------------------------DC Power input port
5. HDMI IINPUT ------------------------------ HDMI Source port
6. HDMI Output ------------------------------- HDMI Output port
7. IR RX ---------------------------------------------------IR RX port
8. IR TX ----------------------------------------------------IR TX port
9. CAT5e/6 Output -------------------------Cat5e/6 Output port
10. RS232 -------------------------------------------------RS232 port
HDMI KVM Extender Receiver
1. Power -----------------------------------DC Power Input Status
2. Status ----------------------------------------------working status
3. K/M ----------------------------------------Keyboard and Mouse
4. DC/5V---------------------------------------DC Power input port
5. HDMI Output ---------------------------------HDMI Output port
6. IR RX ---------------------------------------------------IR RX port
7. IR TX ----------------------------------------------------IR TX port
8. CAT5e/6 Input ------------------------------Cat5e/6 Input port
9. RS232 -------------------------------------------------RS232 port
6.0 CONNECTION AND OPERATION
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect HDMI signal source to the transmitter of HDMI KVM extender;
2. Connect USB signal source to the transmitter of HDMI KVM extender;
3. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and
receiver of HDMI KVM Extender;
4. Connect the display equipment with HDMI connector to the receiver of
HDMI KVM extender;
5. Connect keyboard and mouse to the receiver of HDMI KVM extender;
6. Turn on the power of all devices and the product starts to work.
7.0 INSTALLATION AND PRECAUTIONS
To avoid electric shock , product damage and to protect your safety , please notice the following:
1. Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.
2. The equipment should not be placed under the sun , rain and damp or unventilated environment.
3. Liquid items should not be placed on the equipment.
4. Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.
5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.
6. Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.